Sales & Advice 8am- 5.30pm 0800 270 7 250

My Basket:

0 item(s) - £0.00
You have no items in your shopping cart.

More Views

More Views

Martindale Drummond MTL10/PD Test Lamp & Proving Unit

Part No : MTL10PD

Quick Overview

Test Lamp and Proving Device

Availability: In stock

£169.00

Details

Martindale Drummond MTL10/PD Test Lamp & Proving Unit


Dummond MTL10 and Proving Unit, the proving device can be used to verify the functioning of the test lamp.

The MTL10 gives safe indication of voltage between 50V and 500V AC and 50V to 750V DC


The robust design meets the recommendations of the Health and Safety Executive in their guidance notes on the electrician’s test lamp (GS38) as well as complying with BS EN61243-3 and BS EN61010, CATIII 1000V and CAT IV 600V.

Both the lamp housing and the probe have a finger shield and insulated probe tip with only 4mm of exposed metal. A two layer double insulated cable with white inner insulation gives a clear warning of abrasion that might compromise the user’s safety, and is resistant against heat and oil. To enable use in most circumstances, a right angled probe tip is supplied in addition to the two straight tips.

For maximum ease of use, the right angled probes can be rotated through 90, 180 and 270 degrees. Four distinct bands of illumination, with a 360° viewing angle, provide indication of voltages above 50, 120, 230 and 400 volts even in bright sunlight. This allows accurate identification of potentially lethal voltages above 50V and enables the user to distinguish between 110V, 230V and phase to phase voltages in a 3 phase system.

 

Includes 

MTL10 Test Lamp

PD440 Proving Unit 

Carry Bag 

 

 


This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
X